SEWING PATTERN - F20 PANTS LONG + 3/4

Get a set of pattern and detailed drawn instructions for making your own F20 pants.Along with it you will get an access to a private online whiteboard (on Miro), where more nerdy details can be found and where you can leave comments with questions about any step, which I'll personally answer to.

 F20 is an adventure-ready relaxed pants.
They are long enough to keep you ankles and back waist covered even when squatting.
Its constructions features:
- Unique ‘adjustable elastic breathable waist band’ (AEBWB)
- 2 knee darts (positioned where knees actually are when bent)
- Wide cuff with elaborate cinch 
- Optional side zippered pocket (that could also be used as ventilation opening)
- Separate upper back panel (aka yoke), that can be made out of thinner/quick dry/moisture wicking fabric for more wearing comfort, especially when worn with backpack. 
 
Sizes:
Pattern comes in 9 sizes, covering hip circumferences from 86 to 122 centimetres, and each size come in 3 heights, 158, 170 and 182 cm, resulting in 27 sizes total.

To define your size take your hip circumference (measured around the widest part of your bottom) in centimetres and subtract 6 cm, then choose nearest matching size.
This pants are relaxed and has ample room, so for closer fit you can size down up to two sizes and it will still be roomy enough for average amount of movement.


What you will get:
1. Sewing pattern of both long and 3/4 version in your chosen size in 3 heights, 158, 170 and 182 cm
  1.1 A4 / lettersize print file
  1.2 Plotter print file, 90 cm wide
2. Detailed assembly instructions for F20 pants, including AEBWB (waist belt)
3. Access to an online whiteboard where you could ask questions about any step of assembly


What you will need:
- Fabric, reccommended weight up to 220 g/sqm (amount of fabric very much depends on chosen size and pants length)
- 2 mm elastic cord
- 20+10 mm wide webbing
- Cyberian cordlock if you wish to make exactly the system I designed, alternatively any cordlock that can take 2 strands 2mm cord will do, but you will have to improvise your own way of cord retention;
- 25 mm gross-grain ribbon (or other tape that can be used to finish pants' cuffs);
+ OPTIONAL:
- 4 x eyelets/grommets that fit 2mm cord;